it asks on Forgotten Enemies for 1.3

[EvolutionX]

that it differentiates exists between...........

Forgotten Enemies for 1.3 PB3


Zip size is 273,363MB.

Contents are:

FE_PB3.pak  - 272,713KB <--- Main Pak file
FE_PB3_Maps - 33.3MB <----- BZN map folder
FE_PB3.cfg - 1KB  <---------- CFG to use on command line             
RevC-BZNES-Fix.zip - 20KB  <- Provided it for those using BZNES

All you need is an install of BZ2, 1.3 PB3, and this zip.

1. Install 1.3 PB3 over a BZ2 install.  If you already have PB3 installed, you can skip this step.
2. Unzip this FE_PB3.zip file to the root of your 1.3 PB3 install.
3. Add '/config FE_PB3.cfg' (minus quotes) to your shortcut.

    Example shortcut: "C:\Program Files\BZ2PB3\bzone.exe" /config FE_PB3.cfg

4. Play.


and this version..........

This install of Forgotten Enemies is not made to run under Mod Manager 2.

1. Make/copy a fresh install of BZ2.
2. Install Forgotten Enemies using the Full Installer.
3. Install Rev D.
4. Install Commando's latest FE13 install.
5. Install my FE MPI files (linked below).  IT WILL OVERWRITE YOUR Bzone.cfg.
6. Create a shortcut to this install.

the result is the same one?

[General BlackDragon]

not sure. I would go with the top one. seems easier. and smaller dl.

[Red Devil]

Yes, use this.  After install, you can either leave or delete any FE folders not in that list (or not listed in FE_PB3,cfg).

Sorry for the lack of clarity on my part.  I'll delete the older install instructions.


All you need is an install of BZ2, 1.3 PB3, and this zip.

1. Install 1.3 PB3 over a BZ2 install.  If you already have PB3 installed, you can skip this step.
2. Unzip this FE_PB3.zip file to the root of your 1.3 PB3 install.
3. Add '/config FE_PB3.cfg' (minus quotes) to your shortcut.

    Example shortcut: "C:\Program Files\BZ2PB3\bzone.exe" /config FE_PB3.cfg

4. Play.

[BNG Da BZ Fool]

Alright! FE for 1.3; sort of sings don't it? Where can I dl it?! bzscrap? I love this mod and always will...BNG

PS: special tanks to whomever took the time to convert it for 1.3.

[Steeveeo]

Zip size is 273,363MB.

Heh, I didnt know FE for 1.3 was over 270 gigabytes

[Red Devil]

I combined all the fixes into the main zip and am uploading it now into a new (hopefully pinned) thread.

(good catch)